GM Winch Cradle

Here is our Squarebody GM "Winch Cradle" that supports most 10,000lb winches with a separated solenoid box.  The solenoid box will not fit above the winch, and must be located either off to the side of the winch or moved up into the engine bay or wherever you see fit.  The winch sits underneath the radiator support, and therefore it is much easier to operate the freespool level if it is "clocked" forward for easier access (this can be done to most any winch with some basic know-how).  The Winch Cradle attaches with (4) 1/2" Bolts to the ends of each frame rail, and also with (4) bolts to the crossmember at the anti-sway-bar attachment points.  This is the highest-clearance and best approach angle you will find that still supports a winch - great for those rock-crawlers or tube buggies built off the K-series chassis!  If you are running this on the street, you can also add our side "Wings" that will complete this Winch Cradle into more of a full-coverage bumper.

Comes bare steel only!

**Fitment - '73-'87 model years.  Early Squarebodies ('73-'80) will require that the front frame horns be trimmed, and some of mounting holes to be drilled.  Later models should be bolt-on.

This product is made to order.  Lead times vary, but average 5-10 business days to manufacture before shipping.